Printable Perler Bead Grid Paper
Print a blank square grid to draw your next bead pattern by hand. Choose your board, check the spacing, and download an A4 or US Letter PDF.
Your paper grid
Print spacing · 5 mm
Check your board before actual-size printing. Measure between 11 peg centers and divide by 10. Mini boards can have different spacing.
29 × 29 · 14.5 × 14.5 cm
Check the 100 mm ruler and your board after printing.
Choose the grid that matches your board
A 29×29 square grid is a useful starting point for a Midi board. Mini square boards can have 50 or 52 pegs along each edge. Count the pegs on yours; the two Mini sizes are separate layouts.
Check the spacing before tracing
The 5 mm and 2.6 mm choices are starting estimates. Bead diameter and the distance between peg centers are different measurements. To check the pitch, measure from the center of the first peg to the center of the eleventh, then divide by ten. Enter that value under Custom.
Print at 100%, then measure the ruler
Choose A4 or US Letter to match your paper. In the print dialog, use Actual size or 100% and turn off Fit to page. The ruler on the PDF must measure 100 mm. Place the board on the grid to check several rows before drawing.
Draw, color, and keep the sheet
Use the darker five-cell lines to count across your sketch. If a custom spacing needs several sheets, the PDF marks the row and column range on each part. To make an editable digital pattern instead, open the bead designer below.